Stark cjevovod cirkulira pumpa pumpa za vodu korištenje za postrojenje za prečišćavanje vode sistema

Benvenuti su WhatsApp

STARK TD cjevovod cirkulirajuće pumpe

Technical parameter Flow range: 4m³/h~1200m³/h Lift range: 4.5m~108m Temperature: -15℃~+110°C APPLICATIONS HVAC systems  District heating  Industrial cooling systems  Water supply systems Firefighting systems  Water treatment systems  Other pressure boosting systems  Material: cast iron/stainless steel  
Get A Quote
sprite

Opis proizvoda

ubpipipeline cirkulira pumppelin cirkulirajuća pumpa cjevovod cirkulira pumpabilnom pumpom






Oprema za tretman otpadnih voda


Cevovodna cirkulaciona pumpa

Guangdong Stark Water Treatment Technology Co., Ltd. je kompanija koja se fokusira na postrojenja za prečišćavanje vode i posvećena je istraživanju i razvoju, proizvodnji, prodaji i postprodajnoj usluzi ekološki prihvatljivih industrijskih proizvoda za prečišćavanje vode.
Glavna proizvodnja i rad postrojenja za prečišćavanje vode: sistem reverzne osmoze, ultrafiltracioni sistem, EDI sistem desalinizacije, postrojenje za desalinizaciju morske vode, slano postrojenje za desalinizaciju vode. Proizvodi se široko koriste u elektronici, elektroplatiranju, elektranama, medicini, nafti, hemikalijama, hrani i piću, štampanju i bojenju. Starck nastoji biti vodeći istraživač opreme za prečišćavanje vode u zemlji i inozemstvu!






Q1: When the middle-opened pump equipped with machine seal needs changing the packing, is the shaft in this pump universal?
A: A: Yes, it is universal, but the sealing body, shaft bushing, gland, bolts, fittings and joints must be replaced 

Q2: Pipe pump is used in the degreasing process before painted, and the shaft seal is often leaking even be replaced for several times. How to solve this problem?
A: First of all, confirm leakage part is in the sealing ring or in the sealing ring for corrosion, or in the surface of the friction pair for damage. It is necessary to decide the medium condition of the pump, like whether there are impurities in the medium. Different medium needs corresponding material of corrosion-resisting sealing roller, the medium within impurities grain needs configurating special anti-friction sealing cover.

Q3: Where can I see the installation instructions of CDL pump?
A: you can find it in the the packing box.

Q4: whether the CDL15-10 and CDLF15-10 pump are only different in the base stainless steel, is there any differences in their performance curve?
A: CDL (F) series ordinary type and stainless steel type are exactly the same in performance curve.

Q5: Is there coupling in CDL15-4 ?
A: All CDL(F) series in our company are connected with couplings.

Q6: A circulating pump used in our company are seriously leaking. It is unknown whether the pump is come from your company?
A: The water pump produced by our company can be judged from three points, 1. Pump invoice number, Q beginning
2. Factory number, a total of 10 digits 3. Bar code

Q7: Nowadays, a mechanical seal centrifugal pump is used in playing wastewater use, wastewater containing small molecules of resin, which solidified upon the temperature coming down, which resultedmechanical seal broken down in two days. I would like to ask whether there is a good way to solve this problem.
A: Is the machine seal burnt out? If so, it may be caused by the friction burn out due to solidified grease adhering on the gap between the friction pair and preventing circulating water from entering. You can order our special type of knife edge machine seal to solve the problem, thank you.
sprite

Parametar proizvoda

starkwater

Preporučeni proizvodi

Postavljajte pitanja.